| ASTM |
B392 |
Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire (Withdrawn 2018) |
|
| SAE |
SAE AMS7857 |
Columbium (Niobium) Alloy Bars, Rods, and Extrusions 10Hf - 1.0Ti, Recrystallization Annealed |
|
| ISO |
ISO 16120-2 |
Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod |
|
| ASTM |
B655/B655M |
Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire |
|
| SAE |
SAE AMS2261 |
Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire |
|
| SAE |
SAE MAM2261 |
Tolerances, Metric, Nickel, Nickel Alloys, and Cobalt Alloy Bars, Rods, and Wire |
|
| BSI |
BS EN ISO 16120-4 |
Non-alloy steel wire rod for conversion to wire. Specific requirements for wire rod for special applications |
|
| ASTM |
B166 |
Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire |
|
| SAE |
SAE AMS7851 |
Columbium (Niobium) Alloy Foil, Sheet, Strip, and Plate, 10W - 2.5Zr, Recrystallized |
|
| ISO |
ISO 16120-4 |
Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications |
|
| BSI |
BS EN ISO 16120-2 |
Non-alloy steel wire rod for conversion to wire. Specific requirements for general-purpose wire rod |
|
| SAE |
SAE AMS2201 |
Tolerances, Aluminum And Aluminum Alloy Bar, Rod, Wire, And Forging Stock Rolled Or Cold-Finished |
|
| SAE |
SAE AMSQQA225 |
Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For |
|
| SAE |
SAE MAM2201 |
Tolerances, Metric, Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock, Rolled, Drawn, Or Cold Finished |
|
| ASTM |
B446 |
Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar |
|
| BSI |
BS EN 17263 |
Copper and copper alloys. Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil |
|
| SAE |
SAE AMSQQA225/7 |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 5052 |
|
| SAE |
SAE AMS4102 |
Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated |
|
| SAE |
SAE AMSQQA225/4 |
Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished_x000D_
|
|
| SAE |
SAE AMSQQA225/8 |
Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished |
|
| SAE |
SAE AMSQQA225/2 |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003 |
|
| SAE |
SAE AMS4122 |
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651), Solution and Precipitation Heat Treated |
|
| SAE |
SAE AMSQQA225/9 |
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished |
|
| SAE |
SAE AMSQQA225/10 |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 6262 |
|
| SAE |
SAE AMSQQA225/1 |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 1100 |
|