| SAE |
SAE AMS4094 |
Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
|
|
| BSI |
BS L 173 |
Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition) |
|
| BSI |
BS L 174 |
Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition) |
|
| SAE |
SAE AMS4226 |
Aluminum Alloy Castings, High Strength 5.0Cu - 0.35Mn - 0.18Zr - 0.10V (224.0) Solution and Precipitation Heat Treated (Overaged) |
|
| SAE |
SAE AMS4873 |
Aluminum Bronze Alloy, Sand Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered_x000D_
|
|
| SAE |
SAE AMS4228 |
Aluminum Alloy, Castings, High Strength, 4.5cu 0.70ag 0.30mn 0.25mg 0.25ti, Solution and Precipitation Heat Treated |
|
| SAE |
SAE AMS4242 |
Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged_x000D_
|
|
| SAE |
SAE AMS4225 |
Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated |
|
| ASTM |
A1011/A1011M |
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
|
| ASTM |
A1018/A1018M |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
|
| SAE |
SAE AMS4221 |
Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated_x000D_
|
|
| SAE |
SAE AMS4304 |
Aluminum Alloy, Discontinuously Reinforced Sheet, 2009/SiC/15w (T8P), Solution Heat Treated, Stretched, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4265 |
Aluminum Alloy, Particulate Reinforced Extrusions 6092/Sic/25p - T6p Solution Heat Treated, Quenched, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4107 |
Aluminum Alloy Die Forgings (7050-T74), Solution Heat Treated and Overaged |
|
| ASTM |
A1008/A1008M |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
|
| ASTM |
A635/A635M |
Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
|
| SAE |
SAE AMS5558 |
Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Thin Wall Solution Heat Treated_x000D_
_x000D_
_x000D_
|
|
| SAE |
SAE AMS4195 |
Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated_x000D_
|
|
| SAE |
SAE AMS4987 |
Titanium Alloy, Forgings, 10V - 2Fe - 3AI, Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged, 140 ksi (965 MPa) Tensile Strength_x000D_
|
|
| SAE |
SAE AMS4285 |
Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated_x000D_
|
|
| SAE |
SAE AMS4120 |
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.4Cu - 1.5Mg - 0.60Mn (2024), Solution Heat Treated and Naturally Aged (T4), Solution Heat Treated, Cold Worked, and Naturally Aged (T351) |
|
| SAE |
SAE AMS5355 |
Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated |
|
| SAE |
SAE AMS2248 |
Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys_x000D_
_x000D_
|
|
| SAE |
SAE AMS4148 |
Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated_x000D_
|
|
| SAE |
SAE AMS4364 |
Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged_x000D_
|
|