| SAE |
SAE AMS4094 |
Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4225 |
Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated |
|
| BSI |
BS EN 140401-803 |
Detail specification: Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 |
|
| SAE |
SAE AMS5661 |
Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging or Flash-Welded Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Alloy 901) Consumable Electrode Remelted or Vacuum Induction Melted Solution Heat Treated, Stabilized, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4873 |
Aluminum Bronze Alloy, Sand Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered_x000D_
|
|
| BSI |
BS L 174 |
Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition) |
|
| SAE |
SAE AMS5365 |
Castings, Sand, Corrosion and Heat Resistant, 24Cr - 20.5Ni, Solution Heat Treated |
|
| BSI |
BS 2L 83 |
Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9) |
|
| SAE |
SAE AMS5392 |
Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant, 2.1Cr - 15Ni - 6.5Cu (2.4 - 2.8C), as Cast |
|
| SAE |
SAE AMS4234 |
Aluminum Alloy, Castings Sand Secondary 4 Copper Solution and Precipitation |
|
| BSI |
DD CEN/TS 13130-18 |
Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,2-dihydroxybenzene, 1,3-dihydroxybenzene, 1,4-dihydroxybenzene, 4,4'-dihydroxybenzophenone and 4,4'- dihydroxybiphenyl in food simulants |
|
| SAE |
SAE AMS4230 |
Aluminum Alloy, Castings, Sand, 4.5cu, Solution Treated |
|
| SAE |
SAE AMS5393 |
Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant, 2.0Cr - 20Ni (2.4 - 2.8C), Stress Relieved |
|
| SAE |
SAE AMS5389 |
Alloy Castings, Sand, Corrosion and Heat Resistant, 55Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V, Solution Heat Treated |
|
| SAE |
SAE AMS5410 |
Nickel Alloy, Corrosion- and Heat Resistant, Investment Castings, 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb (Nb) - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr, Vacuum Melted, Vacuum Cast, As Cast, or Solution Treated, or Solution and Precipitation Hardened |
|
| SAE |
SAE AMS7471 |
Bolts and Screws, Nickel Alloy, Corrosion and Heat Resistant, Upset Headed, Heat Treated, Roll Threaded, 1950°F Solution Heat Treatment (AMS 5708) |
|
| SAE |
SAE AMS4482 |
Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, Solution, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4282 |
Aluminum Alloy Castings (Permanent Mold) 4 Copper - 2 Silicon (Solution Precipitation) |
|
| SAE |
SAE AMS7469 |
Bolts and Screws, Corrosion and Heat Resistant, Nickel Alloy, Upset Headed, Heat Treated, Roll Threaded, 2050°F (1120°C) Solution, 1650°F (900°C) Precipitation Heat Treated |
|
| SAE |
SAE AMS4304 |
Aluminum Alloy, Discontinuously Reinforced Sheet, 2009/SiC/15w (T8P), Solution Heat Treated, Stretched, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4265 |
Aluminum Alloy, Particulate Reinforced Extrusions 6092/Sic/25p - T6p Solution Heat Treated, Quenched, and Precipitation Heat Treated |
|
| SAE |
SAE AMS5355 |
Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated |
|
| BSI |
BS EN 4376 |
Aerospace series. Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated. Bar and section, De ≤ 200 mm |
|
| BSI |
BS EN 2119 |
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Solution treated and precipitation treated. Wires for rivets. 2 mm = D = 10 mm. Rm = 960 Mpa |
|
| SAE |
SAE AMS4214 |
Castings, Aluminum Alloy Sand, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71), Solution Heat Treated and Overaged |
|