| SAE |
SAE AMS4094 |
Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4310 |
Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4311 |
Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated |
|
| SAE |
SAE AMS5661 |
Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging or Flash-Welded Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Alloy 901) Consumable Electrode Remelted or Vacuum Induction Melted Solution Heat Treated, Stabilized, and Precipitation Heat Treated
|
|
| BSI |
BS 2L 83 |
Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9) |
|
| SAE |
SAE AMS4195 |
Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated_x000D_
|
|
| SAE |
SAE AMS4154 |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Heat Treated, Stress Relieved by Stretching when Required and Precipitation Heat Treated
|
|
| SAE |
SAE AMS4221 |
Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated_x000D_
|
|
| SAE |
SAE AMS4617 |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged |
|
| BSI |
BS EN 140401-803 |
Detail specification: Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 |
|
| SAE |
SAE AMS4934 |
Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 4V, Solution Heat Treated and Aged
|
|
| SAE |
SAE AMS4265 |
Aluminum Alloy, Particulate Reinforced Extrusions 6092/Sic/25p - T6p Solution Heat Treated, Quenched, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4304 |
Aluminum Alloy, Discontinuously Reinforced Sheet, 2009/SiC/15w (T8P), Solution Heat Treated, Stretched, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4323 |
Aluminum Alloy, Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4933 |
Titanium Alloy Extrusions and Flash Welded Rings, 8Al - 1Mo - 1V, Solution Heat Treated and Stabilized |
|
| ASTM |
A645/A645M |
Standard Specification for Pressure Vessel Plates, 5 % and 5<fraction><num>1</num> <den>2</den></fraction> % Nickel Alloy Steels, Specially Heat Treated |
|
| SAE |
SAE AMS4141 |
Aluminum Alloy Die Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73), Solution and Precipitation Heat Treated |
|
| SAE |
SAE AMS5663 |
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe, Consumable Electrode or Vacuum Induction Melted, 1775 °F (968 °C) Solution and Precipitation Heat Treated_x000D_
_x000D_
|
|
| SAE |
SAE AMS4148 |
Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated_x000D_
|
|
| SAE |
SAE AMS4168 |
Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened |
|
| BSI |
BS L 111 |
Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
|
| BSI |
BS L 112 |
Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
|
| SAE |
SAE AMS5355 |
Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated |
|
| SAE |
SAE AMS4225 |
Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated |
|
| BSI |
BS EN 4060 |
Aerospace series. Filler rods and filler wires for welding in heat resisting alloys. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions |
|