Current Revision

IEEE C57.13-2016

IEEE Standard Requirements for Instrument Transformers

Secure PDF

$104.00

$128.00

Bundle

$208.80

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE C57.13-2016

IEEE Standard Requirements for Instrument Transformers

PUBLISH DATE 2016

PAGES 96

Document Preview

Document Information

Revision Standard - Active. Electrical, dimensional, and mechanical characteristics are covered, taking into consideration certain safety features, for current and inductively coupled voltage transformers of types generally used in the measurement of electricity and the control of equipment associated with the generation, transmission, and distribution of alternating current. The aim is to provide a basis for performance and interchangeability of equipment covered and to assist in the proper selection of such equipment. Safety precautions are also addressed. Accuracy classes for metering service are provided. The test code covers measurement and calculation of ratio and phase angle, demagnetization, impedance and excitation measurements, polarity determination, resistance measurements, short-time characteristics, temperature rise tests, dielectric tests, and measurement of open-circuit voltage of current transformers.

This standard is intended for use as a basis for performance and interchangeability of equipment covered, and to assist in the proper selection of such equipment. Safety precautions are also addressed. This standard covers certain electrical, dimensional, and mechanical characteristics, and takes into consideration certain safety features of current and inductively coupled voltage transformers of types generally used in the measurement of electricity and the control.

The purpose of this standard is to provide the performance requirements for electrical system and test interchangeability of current and inductively coupled voltage transformers. These transformers are for both indoor and outdoor application. This standard covers the requirements for Class 1 instrument transformers. For instrument transformers of a nominal system voltage of 115 kV and above if Class 2 is required refer to IEEE Std C57.13.5(TM).


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	C57.13
Publication Date	June 29, 2016
Language	en - English
Page Count	96
Revision Level
Supercedes
Committee	Transformers

Publish Date	Document Id	Type
June 29, 2016	C57.13-2016	Revision
July 28, 2008	C57.13-2008	Revision
Nov. 30, 1993	C57.13-1993	Revision
Dec. 29, 1978	C57.13-1978	Revision

SDO	Document	Title
IEEE	IEEE C57.13.5	IEEE Standard for Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
IEEE	IEEE C57.17	IEEE Standard Requirements for Arc Furnace Transformers
IEEE	IEEE 316	IEEE Standard Requirements for Direct Current Instrument Shunts
IEEE	IEEE C57.12.39	IEEE Standard for Requirements for Distribution Transformer Tank Pressure Coordination
IEEE	IEEE C57.13.6	IEEE Standard for High Accuracy Instrument Transformers
IEEE	IEEE C57.12.10	IEEE Standard Requirements for Liquid-Immersed Power Transformers
IEEE	IEEE C57.12.36	IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers
IEEE	IEEE C57.18.10	IEEE Standard Practices and Requirements for Semiconductor Power Rectifier Transformers
IEEE	IEEE 262B	IEEE Trial Use Standard Dielectric Test Requirements for Power Transformers for Operation on Effectively Grounded Systems 345 kV and Above
IEEE	IEEE C57.13.2	IEEE Standard for Conformance Test Procedure for Instrument Transformers
IEEE	IEEE 1076/INT	IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual
IEEE	ASA C39.1	ASA American Standard Requirements for Electrical Indicating Instruments Panel, Switchboard, and Portable Instruments
IEEE	IEEE C57.12.01	IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
IEEE	IEEE C57.12.00	IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE	IEEE C57.129	IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
IEEE	ANSI/IEEE 336	IEEE Standard Installation, Inspection, and Testing Requirements for Class 1E Power, Instrumentation and Electric Equipment at Nuclear Power Generating Stations
IEEE	IEEE C57.12.34	IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
IEEE	IEEE 467	IEEE Standard Quality Assurance Program Requirements for the Design and Manufacture of Class 1E Instrumentation and Electric Equipment for Nuclear Power Generating Stations
IEEE	IEEE C57.12.14	IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV
IEEE	IEEE C37.63	IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE	IEEE C37.66	IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
IEEE	IEEE 341	IEEE Standard Requirements for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE	IEEE C37.73	IEEE Standard Requirements for Pad-Mounted Fused Switchgear
IEEE	IEEE C37.30.1	IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V
IEEE	IEEE C37.59	IEEE Standard Requirements for Conversion of Power Switchgear Equipment

IEEE C57.13-2016

IEEE Standard Requirements for Instrument Transformers

IEEE C57.13-2016

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

We use cookies

Manage Cookie Preferences

Essential Cookies Required (3 cookies)

Performance Cookies (2 cookies)