Current Revision

IEEE C57.12.59-2015

IEEE Guide for Dry-Type Transformer Through-Fault Current Duration

Secure PDF

$55.00

$71.00

Bundle

$113.40

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE C57.12.59-2015

IEEE Guide for Dry-Type Transformer Through-Fault Current Duration

PUBLISH DATE 2015

PAGES 21

IEEE C57.12.59-2015

Document Information

Revision Standard - Active. Recommendations believed essential for the application of overcurrent protective devices that limit the exposure time of dry-type transformers to short-circuit currents are set forth in this guide. This guide is not intended to imply overload capability.

This guide for dry-type transformer through-fault current duration applies to dry-type distribution and power transformers built in accordance with IEEE Std C57.12.01.

This guide sets forth recommendations believed essential for the application of overcurrent protective devices that limit the exposure time of dry-type transformers to short-circuit currents. This guide is not intended to imply overload capability.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	C57.12.59
Publication Date	Nov. 6, 2015
Language	en - English
Page Count	21
Revision Level
Supercedes
Committee	Transformers

Publish Date	Document Id	Type
Nov. 6, 2015	C57.12.59-2015	Revision
Jan. 8, 2002	C57.12.59-2001	Revision
Dec. 1, 1989	C57.12.59-1989	Revision

SDO	Document	Title
IEEE	IEEE C57.109	IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
IEEE	IEEE C57.96	IEEE Guide for Loading Dry-Type Distribution and Power Transformers
IEEE	IEEE C37.302	IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC
IEEE	ANSI/IEEE C37.5	IEEE Guide for Calculation of Fault Currents for Application of AC High-Voltage Circuit Breakers Rated on a Total Current Basis
IEEE	IEEE C57.12.51	IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements
IEEE	IEEE C37.110	IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes
IEEE	IEEE C57.12.52	IEEE Standard for Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements
IEEE	IEEE C57.13.1	IEEE Guide for Field Testing of Relaying Current Transformers
IEC	IEC 60076-12	Power transformers - Part 12: Loading guide for dry-type power transformers
IEEE	IEEE C57.13.7	IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA
IEEE	IEEE C57.134	IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers
IEEE	IEEE C57.12.58	IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
IEEE	IEEE C57.12.91	IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE	IEEE C37.081	IEEE Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE	IEEE C57.98	IEEE Guide for Transformer Impulse Tests
IEEE	IEEE C57.159	IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems
IEEE	IEEE C57.123	IEEE Guide for Transformer Loss Measurement
IEEE	IEEE C37.36b	IEEE Guide to Current Interruption with Horn-Gap Air Switches
IEEE	IEEE C57.116	IEEE Guide for Transformers Directly Connected to Generators
IEEE	IEEE 1234	IEEE Guide for Fault Locating Techniques on Shielded Power Cable Systems
IEEE	IEEE 495	IEEE Guide for Testing Faulted Circuit Indicators
IEEE	IEEE C37.114	IEEE Guide for Determining Fault Location on AC Transmission and Distribution Lines
IEEE	IEEE 143	IEEE Guide for Ground Fault Neutralizers, Grounding of Synchronous Generation Systems, Application and Neutral Grounding of Transmission Systems
IEEE	IEEE C37.083	IEEE Guide for Synthetic Capacitive Current Switching Tests of AC High-Voltage Circuit Breakers
IEEE	IEEE 3133	IEEE Guide for Direct-Current Ice-Melting Technology of Overhead Transmission Lines