Historical Revision

IEEE C37.63-1997

IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV

Online PDF

$141.00

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE C37.63-1997

IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV

PUBLISH DATE 1997

PAGES 40

IEEE C37.63-1997

Document Information

Revision Standard - Superseded. Required definitions (for cutout type sectionalizers), ratings, procedures for performing design tests and production tests, constructional requirements, and application considerations for overhead and pad-mounted, dry-vault, and submersible automatic line sectionalizers for ac systems are specified. Keywords: sectionalizers, cutout type, dry-vault sectionalizers, pad-mounted, submersible

This standard applies to all overhead, pad-mounted, dry-vault, and submersible single-pole or multipole alternating current automatic line sectionalizers for rated maximum voltages above 1000 Vac. In order to simplify the vocabulary of this standard, the term sectionalizer has been substituted for automatic line sectionalizer wherever possible.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	C37.63
Publication Date	Sept. 15, 1997
Language	en - English
Page Count	40
Revision Level
Supercedes
Committee	Switchgear

Publish Date	Document Id	Type
April 26, 2013	C37.63-2013	Revision
Aug. 12, 2005	C37.63-2005	Revision
Sept. 15, 1997	C37.63-1997	Revision
Nov. 19, 1984	C37.63-1984	Revision

SDO	Document	Title
IEEE	IEEE C37.60	IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
IEEE	IEEE C37.62	IEEE Standard for Pad-Mounted Dry Vault, Submersible, and Overhead Fault Interrupters for Alternating Current Systems Up to and Including 38 kV
IEEE	IEC 62271-111	IEC 62271-111 Ed.1 (IEEE Std C37.60-2003-Compilation): High Voltage Switchgear and Control gear -- Part 111: Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
IEEE	IEEE C37.74	IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
IEEE	IEEE C57.12.34	IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
IEEE	IEEE/ASA C37.22	ASA Automatic Circuit Reclosers and Automatic Line Sectionalizers for Alternating Current Systems
IEEE	IEEE C37.66	IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
IEEE	IEEE C37.75	IEEE Standard for Pad-Mounted, Pole-Mounted, and Submersible Switchgear Enclosures and Associated Control Enclosures--Coastal and Non-Coastal Environmental Integrity
IEEE	IEEE C37.73	IEEE Standard Requirements for Pad-Mounted Fused Switchgear
IEEE	IEEE C37.20.6	IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
IEEE	IEEE C135.90	IEEE Standard for Pole Line Hardware for Overhead Line Construction
IEEE	IEEE/IEC C37.60/62271-111	IEC/IEEE International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV
IEEE	IEEE 1312	IEEE Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal
IEEE	IEEE/IEC C37.60	IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
IEC	IEC 62271-111	High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV
IEEE	IEEE 48	IEEE Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
IEEE	IEEE C57.12.21	American National Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers With High-Voltage Bushings: High Voltage (34 500 GrdY/19 920 V and Below) and Low Voltage (240/120 V, 167 kVA and Smaller)
IEEE	IEEE 341	IEEE Standard Requirements for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE	IEEE 316	IEEE Standard Requirements for Direct Current Instrument Shunts
IEEE	IEEE C135.63	IEEE Standard for Shoulder Live Line Extension Links for Overhead Line Construction
IEEE	IEEE C57.12.38	IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below
IEEE	IEEE C57.12.28	IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity
IEEE	IEEE C57.12.29	IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments
IEEE	IEEE C57.12.26	IEEE Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors (34 500 GrdY/19 920 Volts and Below, 2500 kVA and Smaller)
IEEE	IEEE 1900.5	IEEE Standard for Policy Language Requirements and System Architectures for Dynamic Spectrum Access Systems

IEEE C37.63-1997

IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV

IEEE C37.63-1997

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

We use cookies

Manage Cookie Preferences

Essential Cookies Required (3 cookies)

Performance Cookies (2 cookies)