Current Revision

IEEE C135.3-2001

IEEE Standard for Zinc-Coated Ferrous Lag Screws for Overhead Line Construction

Secure PDF

$79.00

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE C135.3-2001

IEEE Standard for Zinc-Coated Ferrous Lag Screws for Overhead Line Construction

PUBLISH DATE 2001

PAGES 12

Document Preview

Document Information

New IEEE Standard - Superseded. Zinc-coated steel lag screws of the fetter drive, gimlet point, and twist drive types commonly used in overhead line construction are covered in this standard.

This proposed standard shall cover the basic dimensional and performance requirements for zinc-coated ferrous lag screws.

A standard is required for the fetter drive and gimlet point type lag screws used for pole line construction.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	C135.3
Publication Date	Nov. 6, 2001
Language	en - English
Page Count	12
Revision Level
Supercedes
Committee	Transmission and Distribution

Publish Date	Document Id	Type	View
Nov. 6, 2001	C135.3-2001	Revision

SDO	Document	Title
IEEE	IEEE C135.20	IEEE Standard for Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction
IEEE	IEEE C135.2	IEEE Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction
IEEE	IEEE C135.1	IEEE Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
IEEE	IEEE C135.90	IEEE Standard for Pole Line Hardware for Overhead Line Construction
IEEE	IEEE C135.63	IEEE Standard for Shoulder Live Line Extension Links for Overhead Line Construction
IEEE	IEEE C135.80	IEEE Standard for Fasteners for Overhead Line Construction
IEEE	IEEE/ANSI C135.2	American National Standard For Threaded Zinc-coated Ferrous Strand-eye Anchor Rods And Nuts For Overhead Line Construction
IEEE	IEEE 214	IEEE Standard Construction Drawings of Line Impedance Network Required for Measurement of Conducted Interference to the Power Line from FM and Television Broadcast Receivers in the Range of 300 kHz to 25 MHz as Specified in IEEE Std 213-1961.
IEEE	IEEE C135.62	IEEE Standard for Zinc-Coated Forged Anchor Shackles
IEEE	IEEE C93.4	IEEE Standard for Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission Lines
IEEE	IEEE 1441	IEEE Guide for Inspection of Overhead Transmission Line Construction
IEEE	IEEE 1076/INT	IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual
IEEE	IEEE C135.61	IEEE Standard for the Testing of Overhead Transmission and Distribution Line Hardware
IEEE	IEEE C37.63	IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
BSI	BS EN 10244-2	Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
IEEE	IEEE 1450.3	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Tester Target Specification
IEEE	IEEE 1450.2	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for DC Level Specification
IEEE	IEEE 802.16/Conformance02	IEEE Standard for Conformance to IEEE Standard 802.16 - Part 2: Test Suite Structure and Test Purposes (TSS&TP) for 10-66 GHz WirelessMAN-SC Air Interface
IEEE	IEEE 802.16/Conformance03	IEEE Standard for Conformance to IEEE Standard 802.16 - Part 3: Radio Conformance Tests (RCT) for 10-66 GHz WirelessMAN-SC Air Interface
IEEE	IEEE 1775	IEEE Standard for Power Line Communication Equipment--Electromagnetic Compatibility (EMC) Requirements--Testing and Measurement Methods
IEEE	IEEE C37.60	IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
IEEE	IEEE C57.12.20	IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller; High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below
ASTM	D2201	Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
IEEE	IEEE 656	IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines
BSI	BS EN 50189	Conductors for overhead lines. Zinc coated steel wires

IEEE C135.3-2001

IEEE Standard for Zinc-Coated Ferrous Lag Screws for Overhead Line Construction

IEEE C135.3-2001

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

We use cookies

Manage Cookie Preferences

Essential Cookies Required (3 cookies)

Performance Cookies (2 cookies)