Logo
0
+1 888 608-7511
Need help finding a standard? Help Desk
Logo
Login Create Account
Logo
Create Account Login

IEEE 436-1991

Current Revision
IEEE Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
Best Price Guarantee Published: May 7, 1991 en - English 16 Pages
Sub Total (1 Item(s)) $ 0.00
Estimated Shipping $ 0.00
Total (Pre-Tax) $ 0.00
View in Library
Buy Now
or
Institute of Electrical and Electronics Engineers Logo

IEEE Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers

PUBLISH DATE 1991
PAGES 80
Revision Standard - Inactive-Reserved. A uniform procedure for making corona (partial discharge) measurements by electrical means on electronic transformers is presented. Methods of applying voltage stress, the use of a sine-wave voltage to simulated dc and ac combinations, the types and limitations of voltage stresses encountered, and the acceptable limits of discharge pulse energy are included. Recommended test conditions and the need for negotiation of special tests are discussed. Test apparatus and calibration are described. The aim is to establish a common ground of understanding between transformer and systems design engineers and transformer manufacturers in the development of service and performance requirements.
This guide covers the detection of corona (partial discharge) and the measurement of its magnitude in electronics transformers. Test conditions, test apparatus, and test requirements are included.
Corona (partial discharge) is an ionization phenomenon that can cause deterioration in certain insulation systems. Its presence in electronic equipment can be harmful through its manifestation as circuit noise, spurious voltage or current pulses, or other undesirable effects that lead to circuit malfunctions. Transformers and inductors used in electronic circuits at high voltages can be locations where this harmful phenomenon originates. Even in instances where discharges are not of concern in circuit performance, they be of concern because of their adverse effect on component life. It is, therefore, essential that the insulation system be free of corona discharges at operating voltage stresses. The magnitude or intensity of these discharges is usually of such a low level that very sensitive electronic measuring apparatus and techniques are required to detect them. This guide presents a uniform procedure for making corona (partial discharge) measurements by electrical means on electronics transformers. Methods of applying voltage stress, the use of sine-wave voltage to simulate dc and ac combinations, the types and limitations of voltage stresses encountered, and the acceptable limits of discharge pulse energy are included. Recommended test conditions and the need for negotiation of special tests are discussed.

Failed to load document history.

Publish Date Document Id Type View