Current Revision

IEEE 205-2001

IEEE Standard on Television: Measurement of Luminance Signal Levels

Secure PDF

$141.00

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE 205-2001

IEEE Standard on Television: Measurement of Luminance Signal Levels

PUBLISH DATE 2001

PAGES 16

IEEE 205-2001

Document Information

Revision Standard - Inactive-Withdrawn. A method of measuring the amplitude levels of an SMPTE 170M-1994; NTSC color or monochrome television video signal is described. It is concerned with luminance measurements at various points in transmission systems where the signals are at video frequencies. The methods described are limited to the use of waveform monitors, software video processing for amplitude assessment, or suitable oscilloscopes, and are primarily directed to specifying means of measuring television signal levels for operating purposes.

This standard describes a method of measuring the amplitude levels of an SMPTE 170M-1994,1 NTSC color or monochrome television video signal. It is concerned with luminance measurements at various points in transmission systems where the signals are at video frequencies. The methods described in this standard are limited to the use of waveform monitors, software video processing for amplitude assessment, or suitable oscilloscopes, and are primarily directed to specifying means of measuring television signal levels for operating purposes.

This standard provides a uniform method to measure the luminance portion of a video signal in the possible presence of large chrominance portions. It also specifies a method of measuring video levels in a manner permitting ready correlation between measurements at different points of a system, regardless of the nominal voltages present.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	205
Publication Date	Sept. 6, 2001
Language	en - English
Page Count	16
Revision Level
Supercedes
Committee	Audio and Visual Techniques

Publish Date	Document Id	Type	View
Sept. 6, 2001	205-2001	Revision
Nov. 30, 1957	205-1958	Revision

SDO	Document	Title
IEEE	IEEE 618	IEEE Standard Measurement of Luminance Signal-to-Noise Ratio in Video Magnetic-Tape Recording Systems
IEEE	IEEE/ASA C16.31	ASA American Standard Method of Measurement of Television Luminance Signal Levels
IEEE	IEEE 206	IEEE Standards on Television: Measurement of Differential Gain and Differential Phase
IEEE	IEEE 202	IEEE Standards on Television: Methods of Measurement of Aspect Ratio and Geometric Distortion
IEEE	IEEE 511	IEEE Standard on Video Signal Transmission Measurement of Linear Waveform Distortion
IEEE	IEEE 187	IEEE Standard for Measurement of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz
IEEE	IEEE C37.082	IEEE Standard Methods for the Measurement of Sound Pressure Levels of AC Power Circuit Breakers
IEEE	IEEE 1076/INT	IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual
IEEE	IEEE 1450.2	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for DC Level Specification
IEEE	IEEE 746	IEEE Standard for Performance Measurements of A/D and D/A Converters for PCM Television Video Circuits
IEEE	IEEE 1284	IEEE Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal Computers
IEEE	IEEE 475	IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
IEEE	IEEE 318	IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part 1- Small Signal Measurements
IEEE	IEEE 213	IEEE Standard Procedure for Measuring Conducted Emissions in the Range of 300 kHz to 25 MHz from Television and FM Broadcast Receivers to Power Lines
IEEE	IEEE 1641	IEEE Standard for Signal and Test Definition
IEEE	IEEE 263	IEEE Standard for Measurement of Radio Noise Generated by Motor Vehicles and Affecting Mobile Communications Receivers in the Frequency Range 25-1000 megahertz
IEEE	IEEE 1521	IEEE Standard for Measurement of Video Jitter and Wander
IEEE	IEEE 1450.3	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Tester Target Specification
IEEE	IEEE 802.16/Conformance03	IEEE Standard for Conformance to IEEE Standard 802.16 - Part 3: Radio Conformance Tests (RCT) for 10-66 GHz WirelessMAN-SC Air Interface
IEEE	IEEE 802.16/Conformance02	IEEE Standard for Conformance to IEEE Standard 802.16 - Part 2: Test Suite Structure and Test Purposes (TSS&TP) for 10-66 GHz WirelessMAN-SC Air Interface
IEEE	IEEE C95.1	IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
IEEE	IEEE 1206	IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets
IEEE	IEEE 269	IEEE Standard Method for Measuring Transmission Performance of Telephone Sets
IEEE	IEEE 656	IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines
IEEE	IEEE C95.6	IEEE Standard for Safety Levels With Respect to Human Exposure to Electromagnetic Fields, 0-3 kHz

IEEE 205-2001

IEEE Standard on Television: Measurement of Luminance Signal Levels

IEEE 205-2001

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

We use cookies

Manage Cookie Preferences

Essential Cookies Required (3 cookies)

Performance Cookies (2 cookies)