Current Revision

IEEE 1937.1-2020

IEEE Standard Interface Requirements and Performance Characteristics of Payload Devices in Drones

Online PDF

$59.00

$73.00

Bundle

$118.80

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE 1937.1-2020

IEEE Standard Interface Requirements and Performance Characteristics of Payload Devices in Drones

PUBLISH DATE 2021

PAGES 30

Document Preview

Document Information

New IEEE Standard - Active. General interface requirements and performance characteristics of payload devices in drones are presented. The drone payload interfaces are described in three categories: mechanical interface, electrical interface, and data interface. Mechanical interface is used to fix the payload to the drone. Electrical interface is an electromechanical device used to join electrical terminations. The electrical interface includes the power supply interface and the two-way communication interface. Data interface refers to the communication protocol. The requirements and performance characteristics of the drone payload interface are detailed from the aspect of protection from temperature extremes, humidity, water, dust, vibration/shock, mold, salt spray, etc. Typical drone payloads, interface requirements, and performance characteristics of specific payloads are illustrated.

This standard establishes a framework for drone interface to payload. It defines the interfaces, performance metrics, provisioning, operation control, and management for drone payload devices. This standard specifies payload interface requirements for drones that have a maximum take-off mass (MTOM) less than 25 kg, the drones' built-in payload not included.

IEEE Std 1937.1(TM) describes the general interface requirements and performance characteristics of payload devices in drones.


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	1937.1
Publication Date	Feb. 12, 2021
Language	en - English
Page Count	30
Revision Level
Supercedes
Committee	Unmanned Aerial Vehicles Communications Standards Committee

Publish Date	Document Id	Type	View
Feb. 12, 2021	1937.1-2020	Revision

SDO	Document	Title
IEEE	IEEE 802.20.3	IEEE Standard for Minimum Performance Characteristics of IEEE 802.20 Terminals and Base Stations/Access Nodes
IEEE	IEEE 1505.3	IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
IEEE	IEEE 789	IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments
IEEE	IEEE 488.1	IEEE Standard For Higher Performance Protocol for the Standard Digital Interface for Programmable Instrumentation
IEEE	IEEE 11073-10700	IEEE Standard -- Health Informatics--Device Interoperability Part 10700: Point‐of‐Care Medical Device Communication--Standard for Base Requirements for Participants in a Service‐Oriented Device Connectivity (SDC) System
IEEE	IEEE C57.19.04	IEEE Standard for Performance Characteristics and Dimensions for High Current Power Transformer Bushings with Rated Continuous Current in Excess of 5000 A in Bus Enclosures
IEEE	IEEE 696	IEEE Standard 696 Interface Devices
IEEE	IEEE C57.19.01	IEEE Standard for Performance Characteristics and Dimensions for Power Transformer and Reactor Bushings
IEEE	IEEE 1450.3	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Tester Target Specification
IEEE	IEEE 1450.2	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for DC Level Specification
IEEE	IEEE 820	IEEE Standard Telephone Loop Performance Characteristics
IEEE	IEEE 1474.2	IEEE Standard for User Interface Requirements in Communications-Based Train Control (CBTC) Systems
IEEE	IEEE C57.13.5	IEEE Standard for Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
IEEE	IEEE C57.19.02	IEEE Standard for Design and Performance Requirements for Bushings Applied to Liquid-Immersed Distribution Transformers
IEEE	IEEE 1646	IEEE Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation
IEEE	IEEE 1073.4.1	IEEE Standard for Medical Device Communications - Physical Layer Interface - Cable Connected
IEEE	IEEE 1688	IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules
IEEE	IEEE 1613	IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations
IEEE	IEEE 1613.1	IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities
IEEE	IEEE 32	IEEE Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
IEEE	IEEE 1194.1	IEEE Standard for Electrical Characteristics of Backplane Transceiver Logic (BTL) Interface Circuits
IEEE	IEEE 1284.3	IEEE Standard for Interface and Protocol Extensions to IEEE Std 1284 Compliant Peripherals and Host Adapters
IEEE	IEEE C37.237	IEEE Standard for Requirements for Time Tags Created by Intelligent Electronic Devices--COMTAG
IEEE	IEEE C57.32	IEEE Standard for Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
IEEE	IEEE 1621	IEEE Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office/Consumer Environments

IEEE 1937.1-2020

IEEE Standard Interface Requirements and Performance Characteristics of Payload Devices in Drones

IEEE 1937.1-2020

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

We use cookies

Manage Cookie Preferences

Essential Cookies Required (3 cookies)

Performance Cookies (2 cookies)