Current Revision

IEEE 1652-2016

IEEE Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points

Online PDF

$65.00

$80.00

Bundle

$130.50

Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00

I have read and agree to the Terms & Conditions

IEEE 1652-2016

IEEE Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points

PUBLISH DATE 2016

PAGES 35

IEEE 1652-2016

Document Information

Revision Standard - Active. The data and rationale for translating head and torso simulator measurements from eardrum to other acoustic reference points such as free field and diffuse field are provided in this standard.

This standard provides the data, techniques, and rationale for translating head and torso simulator measurements from the eardrum to other acoustic reference points, such as the free field and the diffuse field. It applies primarily to measurements of devices that contact the ear, such as headsets and handsets. It can also be used for devices that do not contact the ear, such as speakerphones and wearable devices. It is applicable to communication and multimedia audio devices over the frequency range of 20 Hz to 20 kHz

Common acoustic reference points are needed for comparing electroacoustic performance of handsets, headsets, speakerphones and other kinds of communication devices. It is also needed for comparing communication devices with other devices such as loudspeakers, multimedia terminals and consumer audio equipment. The free field and diffuse field are appropriate reference points because the results relate closely to what we hear. For measurements on communication devices, the free field or diffuse field are more widely applicable reference points than the legacy ear reference point (ERP).


SDO	IEEE: Institute of Electrical and Electronics Engineers
Document Number	1652
Publication Date	Nov. 25, 2016
Language	en - English
Page Count	35
Revision Level
Supercedes
Committee	Standards Development Board

Publish Date	Document Id	Type	View
Nov. 25, 2016	1652-2016	Revision
March 20, 2009	1652-2008	Revision

SDO	Document	Title
IEEE	IEEE 1076/INT	IEEE Standards Interpretations: IEEE Std 1076-1987, IEEE Standard VHDL Language Reference Manual
BSI	DD IEC/TS 60318-7	Electroacoustics. Simulators of human head and ear. Head and torso simulator for the measurement of hearing aids
BSI	PD IEC/TS 60318-7	Electroacoustics. Simulators of human head and ear. Head and torso simulator for the measurement of air-conduction hearing aids
IEEE	IEEE 310	IEEE Standard for Reference-Standard Electrical Resistors
IEEE	IEEE 1666	IEEE Standard for Standard SystemC Language Reference Manual
IEC	IEC 60318-7	Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear
IEEE	IEEE 2400	IEEE Standard for Wind Turbine Aero Acoustic Noise Measurement Techniques
IEEE	IEEE 3101	IEEE Standard for Fiber Optic Distributed Acoustic Sensing (DAS) Interrogator Standard--Terminology and Definitions
IEEE	IEEE 475	IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
IEEE	IEEE 618	IEEE Standard Measurement of Luminance Signal-to-Noise Ratio in Video Magnetic-Tape Recording Systems
IEEE	IEEE 1175	IEEE Standard Reference Model for Computing System Tool Interconnections
IEEE	IEEE 200	IEEE Standard Reference Designations for Electrical and Electronics Parts and Equipments
IEEE	IEEE 187	IEEE Standard for Measurement of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz
IEEE	IEEE 263	IEEE Standard for Measurement of Radio Noise Generated by Motor Vehicles and Affecting Mobile Communications Receivers in the Frequency Range 25-1000 megahertz
IEEE	IEEE 1521	IEEE Standard for Measurement of Video Jitter and Wander
IEEE	IEEE 1450.2	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for DC Level Specification
IEEE	IEEE 1450.3	IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for Tester Target Specification
IEEE	IEEE 802.16/Conformance02	IEEE Standard for Conformance to IEEE Standard 802.16 - Part 2: Test Suite Structure and Test Purposes (TSS&TP) for 10-66 GHz WirelessMAN-SC Air Interface
IEEE	IEEE 802.16/Conformance03	IEEE Standard for Conformance to IEEE Standard 802.16 - Part 3: Radio Conformance Tests (RCT) for 10-66 GHz WirelessMAN-SC Air Interface
IEEE	IEEE 746	IEEE Standard for Performance Measurements of A/D and D/A Converters for PCM Television Video Circuits
IEEE	IEEE 269	IEEE Standard Method for Measuring Transmission Performance of Telephone Sets
IEEE	IEEE C37.118.1	IEEE Standard for Synchrophasor Measurements for Power Systems
IEEE	IEEE 1206	IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets
IEEE	IEEE 302	IEEE Standard Methods for Measuring Electromagnetic Field Strength for Frequencies Below 1000 MHz in Radio Wave Propagation
IEEE	IEEE 299.1	IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m

IEEE 1652-2016

IEEE Standard for Translating Head and Torso Simulator Measurements from Eardrum to Other Acoustic Reference Points

IEEE 1652-2016

Document Information

Terms of Service

Conditions of Use

Privacy Policy

Copyright

Communications

Privacy Policy

We use cookies

Manage Cookie Preferences

Essential Cookies Required (3 cookies)

Performance Cookies (2 cookies)